Toyota Tundra Service Manual: Touch Panel Switch does not Function

PROCEDURE

1.

CHECK TOUCH PANEL

(a) Check for foreign matter on the display.

OK:

The display is clean.

NG

CLEAN DISPLAY AND RECHECK TOUCH PANEL

OK

2.

CHECK TOUCH SWITCH (OPERATION CHECK)

(a) Enter the "Touch Switch Check" screen. [Refer to Check Touch Switch in Operation Check (See page )]

(b) Touch the display in the area where the switch malfunction occurs.

OK:

A "+" mark appears at the touched position.

Result

Result

Proceed to

OK (for Column Shift Type)

A

OK (for Floor Shift Type)

B

NG

C

A

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY

B

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY

C

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

    Terminals Of Ecu

    Sending Malfunction (Navigation to APGS) (U0073,U0100,U0129,U0140,U0155,U0164)

    See More:

    Toyota Tundra Service Manual > Blind Spot Monitor System: Freeze Frame Data
    FREEZE FRAME DATA 1. FREEZE FRAME DATA (a) Whenever a DTC is stored, the blind spot monitor sensor stores the current vehicle (sensor) state as Freeze Frame Data. 2. CHECK FREEZE FRAME DATA (a) Connect the Techstream to the DLC3. (b) Turn the ignition switch to ON. (c) Turn the Techstream on. (d) En ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2025 Copyright www.ttundra.com
    0.0142