Toyota Tundra Service Manual: Removal

REMOVAL

PROCEDURE

1. REMOVE FRONT SEAT ASSEMBLY LH

(a) for Power Seat:

(see page )

(b) for Manual Seat:

(see page )

2. REMOVE FRONT SEAT ASSEMBLY RH

HINT:

Use the same procedure as for the driver seat.

(a) for Power Seat:

(see page )

(b) for Manual Seat:

(see page )

3. REMOVE CENTER FRONT SEAT ASSEMBLY

(a) Open the center front seat cushion sub-assembly.

(b) Take out the center seat cushion carpet.

(c) Remove the 4 bolts and disconnect the connector.

(d) Remove the center front seat assembly.

NOTICE:

Be careful not to damage the vehicle body.

    Reassembly

    Front Seat Assembly(for Manual Seat)

    See More:

    Toyota Tundra Service Manual > Can Communication System: Open in One Side of Bus 4 Branch Line
    DESCRIPTION When the CAN bus main lines are normal (no open, short to ground, short to +B or short between lines) and there is an ECU or sensor on the "Communication Bus Check" screen that is indicated as not communicating or whose connection status on the "Communication Bus Check" screen changes in ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2024 Copyright www.ttundra.com
    0.0308