Toyota Tundra Service Manual: Installation

INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

HINT:

  • Use the same procedure for the RH and LH sides.
  • The procedure listed below is for the LH side.

PROCEDURE

1. INSTALL FRONT SEAT CUSHION HEATER ASSEMBLY LH

(a) Set the front seat cushion heater assembly LH on the separate type front seat cushion cover.

(b) Using a tacker, install the front seat cushion heater assembly LH to the separate type front seat cushion cover with 10 new tack pins as shown in the illustration.

NOTICE:

Do not substitute other metal parts for tack pins.

2. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER

3. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD

4. INSTALL SEPARATE TYPE FRONT SEATBACK ASSEMBLY

5. INSTALL FRONT INNER NO. 1 SEAT CUSHION SHIELD LH

6. INSTALL FRONT SEAT CUSHION SHIELD LH

7. INSTALL FRONT SEAT ASSEMBLY

(See page )

    Inspection

    Removal

    See More:

    Toyota Tundra Service Manual > Vehicle Stability Control System: Brake Actuator Operation Sound is Loud during Initial Check
    CAUTION / NOTICE / HINT NOTICE: When replacing the skid control ECU (brake actuator assembly), perform system variant learning and acceleration sensor zero point calibration. Click here PROCEDURE 1. PERFORM ROAD TEST (a) After turning the ignition switch to ON, compare the operating sound of the bra ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2026 Copyright www.ttundra.com
    0.0251