Toyota Tundra Service Manual: Installation

INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

HINT:

  • Use the same procedure for the RH and LH sides.
  • The procedure listed below is for the LH side.

PROCEDURE

1. INSTALL FRONT SEATBACK HEATER ASSEMBLY LH

(a) Set the front seatback heater assembly LH on the separate type front seatback cover.

(b) Using a tacker, install the front seatback heater assembly LH to the separate type front seatback cover with 8 new tack pins as shown in the illustration.

NOTICE:

Do not substitute other metal parts for tack pins.

2. INSTALL SEPARATE TYPE FRONT SEATBACK COVER

3. INSTALL SEPARATE TYPE FRONT SEATBACK ASSEMBLY

4. INSTALL FRONT INNER NO. 1 SEAT CUSHION SHIELD LH

5. INSTALL FRONT SEAT CUSHION SHIELD LH

6. INSTALL FRONT SEAT ASSEMBLY LH

(See page )

    Inspection

    Removal

    See More:

    Toyota Tundra Service Manual > Occupant Classification System: Rear Occupant Classification Sensor LH Collision Detection (B1787)
    DESCRIPTION DTC B1787 is set when the occupant classification ECU receives a collision detection signal, which is sent by the rear occupant detection sensor LH when an accident occurs. DTC B1787 is also set when the front seat frame with adjuster RH is subjected to a strong impact, even if an actual ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2023 Copyright www.ttundra.com
    0.0199