Toyota Tundra Service Manual: Installation

Toyota Tundra Service Manual / Vehicle Interior / Seat / Power Seat Switch(w/o Seat Position Memory System) / Installation

INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

HINT:

  • Use the same procedure for the RH and LH sides.
  • The procedure listed below is for the LH side.
  • A bolt without a torque specification is shown in the standard bolt chart (See page ).

PROCEDURE

1. INSTALL FRONT POWER SEAT SWITCH LH

(a) Install the front power seat switch LH with the 3 screws.

2. INSTALL RECLINING POWER SEAT SWITCH KNOB

3. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB

4. INSTALL FRONT SEAT CUSHION SHIELD LH

5. INSTALL FRONT SEAT ASSEMBLY LH

(See page )

    Inspection

    Removal

    See More:

    Toyota Tundra Service Manual > Pre-collision System: Lost Communication with Gateway Module (U1002)
    DESCRIPTION DTC U1002 is stored when the millimeter wave radar sensor assembly cannot receive signals from the forward recognition camera. DTC No. Detection Item DTC Detection Condition Trouble Area U1002 Lost Communication with Gateway Module After the ignition switch is turned to ON, communication ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2026 Copyright www.ttundra.com
    0.0309