SYSTEM DESCRIPTION 1. GENERAL (a) By operating the seat heater switch, which is located in the air conditioning control assembly, the temperature is controlled to 3 settings.
(b) Whether the seat heater is on or off can be determined by checking if the indication is located in air conditioning control assembly. (c) The seat heaters of both seats are controlled by the seat heater switches, which are located on the air conditioning control assembly. |
Toyota Tundra Service Manual > Vehicle Stability Control System: Open in ABS Motor Relay Circuit (C146C)
DESCRIPTION The ABS motor relay supplies power to the pump motor. While the ABS is activated, the skid control ECU (brake actuator assembly) turns the ABS motor relay on to operate the pump motor. If the voltage supplied to the ABS motor relay (+BM) is too low due to low voltage from the battery or ...
