Toyota Tundra Service Manual: Customize Parameters

CUSTOMIZE PARAMETERS

1. CUSTOMIZING FUNCTION WITH TECHSTREAM

HINT:

The following items can be customized.

NOTICE:

  • When the customer requests a change in a function, first make sure that the function can be customized.
  • Be sure to make a note of the current settings before customizing.
  • When troubleshooting a function, first make sure that the function is set to the default setting.

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch ON.

(c) Turn the tester on.

(d) Enter the following menus:

Select: Customize Setting.

(e) Select the setting by referring to the table below.

Sliding Roof

Display (Item)

Default

Contents

Setting

Door Key Related Open

ON

Function to manually open sliding roof linked with power window if holding driver side door key for 3 seconds or more to unlock position when ignition switch is off

ON / OFF

Door Key Related Close

ON

Function to manually close sliding roof linked with power window if holding driver side door key for 3 seconds or more to lock position when ignition switch is off

ON / OFF

Door Key Related Operation

SLIDE

Function to select tilt up or slide open of manual sliding roof operation linked with power window activated by holding driver side door key for 3 seconds or more to unlock position when ignition switch is off

TILT / SLIDE

    Position Initialization Incomplete (B2343)

    Data List / Active Test

    See More:

    Toyota Tundra Service Manual > Generator: Installation
    INSTALLATION PROCEDURE 1. INSTALL GENERATOR ASSEMBLY (a) Install the generator with the 3 bolts and nut. Torque: 43 N·m {438 kgf·cm, 32 ft·lbf} (b) Install the harness bracket to the generator with the bolt. Torque: 31 N·m {316 kgf·cm, 23 ft·lbf} (c) Connect the generator connector. (d) Connec ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2024 Copyright www.ttundra.com
    0.0336