Toyota Tundra Service Manual: Data List / Active Test

DATA LIST / ACTIVE TEST

1. READ DATA LIST

HINT:

Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

NOTICE:

In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch to ON.

(c) Turn the Techstream on.

(d) Enter the following menus: Body Electrical / Occupant Detection / Data List.

(e) According to the display on the Techstream, read the "Data List".

Occupant Detection:

Tester Display

Test Part

Control Range

Diagnostic Note

IG Switch

Ignition switch condition/

ON: Ignition switch ON

OFF: Ignition switch OFF

ON/OFF

-

Passenger Buckle SW

Buckle switch (Passenger side)/

Unset: Unfasten the passenger side seat belt

Set: Fasten the passenger side seat belt

NG: Passenger side seat belt has trouble

Unset/Set

-

Passenger Classification

Passenger classification/

AM50: Adult more than 54 kg (119.05 lb) is seated

AF05: Adult (36 to 54 kg (79.37 to 119.05 lb)) is seated

CHILD: Child (less than 36 kg (79.37 lb)) is seated

CRS: Child restraint system (less than 7 kg (15.43 lb)) and passenger side buckle switch is ON, then 7 to 36 kg (15.43 to 79.37 lb) is set

OFF: Vacant

AM50/AF05/CHILD/CRS/OFF

-

Sensor Range Info

Sensor range information/

OK: The value of a sensor is within the range

NG: The value of a sensor is over the range

OK

-

FL Sensor Range Info

Front left sensor range information/

OK: Sensor range is -17 to 27 kg (-37.48 to 59.52 lb)

Min.: Less than -17 kg (-37.48 lb)

Max.: More than 27 kg (59.52 lb)

OK

-

FR Sensor Range Info

Front right sensor range information/

OK: Sensor range is -17 to 27 kg (-37.48 to 59.52 lb)

Min.: Less than -17 kg (-37.48 lb)

Max.: More than 27 kg (59.52 lb)

OK

-

RL Sensor Range Info

Rear left sensor range information/

OK: Sensor range is -17 to 37 kg (-37.48 to 81.57 lb)

Min.: Less than -17 kg (-37.48 lb)

Max.: More than 37 kg (81.57 lb)

OK

-

RR Sensor Range Info

Rear right sensor range information/

OK: Sensor range is -17 to 37 kg (-37.48 to 81.57 lb)

Min.: Less than -17 kg (-37.48 lb)

Max.: More than 37 kg (81.57 lb)

OK

-

FL Sensor Voltage

Front left sensor voltage/

Min.: 0 V

Max.: 19.8 V

0 to 4.7 V

-

FR Sensor Voltage

Front right sensor voltage/

Min.: 0 V

Max.: 19.8 V

0 to 4.7 V

-

RL Sensor Voltage

Rear left sensor voltage/

Min.: 0 V

Max.: 19.8 V

0 to 4.7 V

-

RR Sensor Voltage

Rear right sensor voltage/

Min.: 0 V

Max.: 19.8 V

0 to 4.7 V

-

FL Sensor Weight Info

Front left sensor weight information/

Min.: -17 kg (-37.48 lb)

Max.: 27 kg (59.52 lb)

-17 to 27 kg

(-37.48 to 59.52 lb)

-

FR Sensor Weight Info

Front right sensor weight information/

Min.: -17 kg (-37.48 lb)

Max.: 27 kg (59.52 lb)

-17 to 27 kg

(-37.48 to 59.52 lb)

-

RL Sensor Weight Info

Rear left sensor weight information/

Min.: -17 kg (-37.48 lb)

Max.: 37 kg (81.57 lb)

-17 to 37 kg

(-37.48 to 81.57 lb)

-

RR Sensor Weight Info

Rear right sensor weight information/

Min.: -17 kg (-37.48 lb)

Max.: 37 kg (81.57 lb)

-17 to 37 kg

(-37.48 to 81.57 lb)

-

Total Weight Information

Total weight information/

Min.: -68 kg (-149.91 lb)

Max.: 128 kg (282.19 lb)

-68 to 128 kg

(-149.91 to 282.19 lb)

-

Number of Past DTC

Number of present trouble codes/

Min.: 0, Max.: 255

0

-

Number of Present DTC

Number of DTC recorded/

Min.: 0, Max.: 255

0

-

    Sleep Operation Failure of Occupant Classification ECU (B1796)

    Diagnosis System

    See More:

    Toyota Tundra Service Manual > Dynamic Radar Cruise Control System: Cruise Control Switch Circuit
    DESCRIPTION The cruise control main switch is used to turn the dynamic radar cruise control system on and off, as well as operate 7 functions: SET, - (COAST), TAP-DOWN, RES (RESUME), + (ACCEL), TAP-UP and CANCEL. The SET, TAP-DOWN and - (COAST) functions, and the RES (RESUME), TAP-UP and + (ACCEL) f ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2024 Copyright www.ttundra.com
    0.0161