Toyota Tundra Service Manual: Data List / Active Test

DATA LIST / ACTIVE TEST

1. DATA LIST

HINT:

Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch to ON.

(c) Turn the Techstream on.

(d) Enter the following menus:

Select: Body Electrical / Main Body / Data List.

(e) According to the display on the Techstream, read the Data List.

Main Body

Tester Display

Measurement Item/Range

Normal Condition

Diagnostic Note

Key Unlock Warning SW

Unlock warning switch signal/ON or OFF

ON: Key inserted in the ignition key cylinder

OFF: Key removed from the ignition key cylinder

-

ACC SW

Ignition switch/ON or OFF

ON: Ignition switch ACC

OFF: Ignition switch off

"ON" is also displayed for this item when the ignition switch is ON.

IG SW

Ignition switch/ON or OFF

ON: Ignition switch ON

OFF: Ignition switch off

"OFF" is also displayed for this item when the ignition switch is ACC.

FL Door Courtesy SW

Front courtesy light switch LH/ON or OFF

ON: Front door LH open

OFF: Front door LH closed

-

FR Door Courtesy SW

Front courtesy light switch RH/ON or OFF

ON: Front door RH open

OFF: Front door RH closed

-

RR Door Courtesy SW

Rear courtesy light switch RH/ON or OFF

ON: Rear door RH open

OFF: Rear door RH closed

-

RL Door Courtesy SW

Rear courtesy light switch LH/ON or OFF

ON: Rear door LH open

OFF: Rear door LH closed

-

FL Door Lock Pos

Front door LH unlock detection switch/LOCK or UNLOCK

LOCK: Front door LH locked

UNLOCK: Front door LH unlocked

-

FR Door Lock Pos

Front door RH unlock detection switch/LOCK or UNLOCK

LOCK: Front door RH locked

UNLOCK: Front door RH unlocked

-

RR-Door Lock Pos SW

Rear door RH unlock detection switch/ON or OFF

ON: Either of rear door LH or rear door RH unlocked

OFF: Both of rear door LH and rear door RH locked

-

RL-Door Lock Pos SW

Rear door LH unlock detection switch/ON or OFF

ON: Either of rear door LH or rear door RH unlocked

OFF: Both of rear door LH and rear door RH locked

-

Door Key SW-Lock

Driver door lock/unlock switch lock signal (key-linked lock switch)/ON or OFF

ON: Driver side door key cylinder turned to lock

OFF: Driver side door key cylinder turned to unlock

-

D Door Key SW-UL

Driver door lock/unlock switch unlock signal (key-linked unlock switch)/ON or OFF

ON: Driver side door key cylinder turned to unlock

OFF: Driver side door key cylinder turned to lock

-

Hood Courtesy SW

Engine hood courtesy switch/ON or OFF

ON: Engine hood open

OFF: Engine hood closed

-

Glass Break Sensor Detection*

Glass breakage sensor detection/ON or OFF

ON: Glass breakage sensor ON

OFF: Glass breakage sensor OFF

-

Panic Function

Panic function status/ON or OFF

Customization status displayed

-

HINT:

*: w/ Glass Breakage Sensor

2. ACTIVE TEST

HINT:

Using the Techstream to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. The Data List can be displayed while performing Active Tests.

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch to ON.

(c) Turn the Techstream on.

(d) Enter the following menus:

Select: Body Electrical / Main Body / Active Test.

(e) According to the display on the Techstream, perform the Active Test.

Main Body

Tester Display

Test Part

Control Range

Diagnostic Note

Vehicle Horn

Vehicle horns

ON/OFF

-

Security Indicator

Security indicator light

ON/OFF

-

Security Horn

Security horn assembly

ON/OFF

-

    Customize Parameters

    Engine Hood Courtesy Switch Circuit

    See More:

    Toyota Tundra Service Manual > Inner Rear View Mirror: Inspection
    INSPECTION PROCEDURE 1. INSPECT INNER REAR VIEW MIRROR ASSEMBLY (w/ EC Mirror) (a) Inspect the operation of the electrochromic inner rear view mirror assembly. *a Black Colored Tape *b Forward Sensor *c Bright *d Dark *e Battery *f EC Switch *g Component without harness connected (Inner Rear View Mi ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2024 Copyright www.ttundra.com
    0.0365