Toyota Tundra Service Manual: Customize Parameters

Toyota Tundra Service Manual / Vehicle Interior / Window / Glass / Power Window Control System(w/ Jam Protection Function) / Customize Parameters

CUSTOMIZE PARAMETERS

1. CUSTOMIZING FUNCTION WITH TECHSTREAM (REFERENCE)

NOTICE:

  • When the customer requests a change in a function, first make sure that the function(s) can be customized.
  • Be sure to make a note of the current settings before customizing.
  • When troubleshooting a function, first make sure that the function is set to the default setting.

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch to ON.

(c) Turn the Techstream on.

(d) Enter the following menus: Customize Setting / Power window.

(e) Select the setting by referring to the table below.

Power Window

Display (Item)

Default

Content

Setting

Door Key P/W Up

ON

Function that raises the driver and front passenger side power windows when, with the ignition switch off, a key is used to hold the driver door key cylinder to the lock position for more than 2.3 seconds.

ON/OFF

Door Key P/W Down

ON

Function that lowers the driver and front passenger side power windows when, with the ignition switch off, a key is used to hold the driver door key cylinder to the unlock position for more than 2.3 seconds.

ON/OFF
    Glass Position Initialization Incomplete (B2313)

    Data List / Active Test

    See More:

    Toyota Tundra Service Manual > Front Crankshaft Oil Seal: Installation
    INSTALLATION PROCEDURE 1. INSTALL FRONT CRANKSHAFT OIL SEAL (a) Apply MP grease to the lip of a new oil seal. (b) Using SST and a hammer, tap in the oil seal to a depth between 0 to 1.0 mm (0 to 0.0394 in.) from the timing chain cover edge. SST: 09223-22010 SST: 09506-35010 NOTICE: Keep the lip free ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2026 Copyright www.ttundra.com
    0.0317