Adjustment procedure Manually adjustable type Adjust the mirror up and down, in or out by pushing the mirror surface. Power-adjustable type (type A) 1. To select a mirror to adjust, press the switch.
2. To adjust the mirror, press the switch.
Power-adjustable type (type B) Upper part mirror: 1. To select a mirror to adjust, press the switch.
2. To adjust the mirror, press the switch.
Lower part mirror: Adjust the mirror up and down, in or out by pushing the mirror surface. Folding the mirrors From outside Push the mirror back in the direction of the vehicle's rear. From inside (if equipped) Press the switch to fold the mirrors. Press it again to extend them to the original position. Extending the mirrors (if equipped) The mirrors can be manually slid outward to improve visibility around wide trailers. Linked mirror function when reversing (if equipped) When the mirror select switch is in the L or R position, the outside rear view mirrors will automatically angle downwards when the vehicle is reversing in order to give a better view of the ground. To disable this function, move the mirror select switch to the neutral position (between L and R). ■ Adjusting the mirror angle when the vehicle is reversing With the shift lever in R, adjust the mirror angle at a desired position. The adjusted angle will be memorized and the mirror will automatically tilt to the memorized angle whenever the shift lever is shifted to R from next time. The memorized downward tilt position of the mirror is linked to the normal position (angle adjusted with the shift lever in other than R). Therefore, if the normal position is changed after adjustment, the tilt position will also change. When the normal position is changed, readjust the angle in reversing. ■Recommended mirror angle when towing a trailer (vehicles with extending mirrors)
■Mirror operating conditions (power-adjustable type) The engine switch is in the "ACC" or "ON" position. ■When the mirrors are fogged up (vehicles with outside rear view mirror defoggers) Turn on the mirror defoggers to defog the mirrors. ■Automatic adjustment of the mirror angle (vehicles with driving position memory) A desired mirror face angle can be entered to memory and recalled automatically by the driving position memory. ■Auto anti-glare function (if equipped) When the anti-glare inside rear view mirror is set to automatic mode, the outside rear view mirrors will activate in conjunction with the anti-glare inside rear view mirror to reduce reflected light.
|
Toyota Tundra Service Manual > Power Window Control System(w/o Jam Protection Function): Key-off Operation Function Operates even if Operating Conditions are not Satisfied
DESCRIPTION When the front doors are closed and the ignition switch is turned from ON to OFF, each power window regulator motor can control its power window operation for approximately 43 +/-1.5 seconds by receiving operation permission signals from the main body ECU (multiplex network body ECU). Ho ...