Toyota Tundra Service Manual: System Description

SYSTEM DESCRIPTION

1. GENERAL

(a) This system has a television camera assembly mounted on the tail gate to assist the driver in parking the vehicle by displaying an image of the area behind the vehicle. The system displays the image on the radio and display receiver assembly.

(b) This system consists of the following components:

(1) Radio and display receiver assembly

(2) Television camera assembly

(3) Park/neutral position switch assembly

(c) This system is equipped with a self-diagnosis system, which is operated from a dedicated window that appears on the display panel, just as in the audio and visual system.

2. FUNCTION OF COMPONENTS

(a) The radio and display receiver assembly controls the system by using information from the following components:

Item

Function

Television camera assembly

  • Captures the view behind the vehicle and transmits the image to the radio and display receiver assembly.
  • Has a color video camera that uses a Complementary Metal Oxide Semiconductor (CMOS) and wide-angle lens.

Radio and display receiver assembly

  • Receives the video signals which contain an image of the area behind the vehicle taken with the television camera.
  • Performs control of the system by receiving a shift position signal from the park/neutral position switch assembly.
  • Displays the rear view monitor image on the display panel.

Park/neutral position switch assembly

Transmits a reverse signal to the radio and display receiver assembly.

3. OPERATION EXPLANATION

(a) The park/neutral position switch assembly outputs the R position signal to the radio and display receiver assembly when the shift lever is moved to R. After receiving the R position signal, the radio and display receiver assembly switches to the rear view monitor system.

    Screen Flicker or Color Distortion

    System Diagram

    See More:

    Toyota Tundra Service Manual > Headlight Leveling Switch: Inspection
    INSPECTION PROCEDURE 1. INSPECT HEADLIGHT LEVELING SWITCH (a) Check the voltage. (1) Connect the battery positive (+) lead to terminal 1 (B) and the negative (-) lead to terminal 5 (E). (2) Measure the voltage according to the value(s) in the table below. Standard Voltage: Tester Connection Switch C ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2024 Copyright www.ttundra.com
    0.0332