DESCRIPTION This DTC is stored when a malfunction is detected in the vehicle stability control system. Check the vehicle stability control system when DTC C13A9 is stored.
CAUTION / NOTICE / HINT NOTICE: The trailer brake control system uses the CAN communication system. First, confirm that there are no malfunctions in the CAN communication system. Refer to How to Proceed with Troubleshooting. Click here
PROCEDURE
HINT: Trailer brake control system DTC C13A9 may be stored due to a malfunction in the vehicle stability control system. Therefore, it is necessary to check for and troubleshoot vehicle stability control system DTCs first. (a) Check for DTCs. Click here
(a) Clear the DTCs. Click here (b) Turn the ignition switch off. (c) Turn the ignition switch to ON. (d) Check if the same DTC is output. Click here
|
Toyota Tundra Service Manual > Lighting System: Problem Symptoms Table
PROBLEM SYMPTOMS TABLE NOTICE: When replacing the combination meter assembly, always replace it with a new one. If a combination meter assembly which was installed to another vehicle is used, the information stored in it will not match the information from the vehicle and a DTC may be stored. When r ...
