Toyota Tundra Service Manual: Fuel Pump Ecu

Components

COMPONENTS

ILLUSTRATION

Installation

INSTALLATION

PROCEDURE

1. INSTALL FUEL PUMP ECU

(a) Install the fuel pump ECU with the nut.

Torque:

31 N·m {316 kgf·cm, 23 ft·lbf}

NOTICE:

Do not use the fuel pump ECU if it has been subjected to physical shocks, such as being dropped, etc.

(b) Connect the fuel pump ECU connector.

(1) Connect the fuel pump ECU connector.*1

(2) Rotate the lever in the direction of the arrow until a "click" sound is heard.*2

Removal

REMOVAL

PROCEDURE

1. REMOVE FUEL PUMP ECU

(a) Disconnect the fuel pump ECU connector.

(1) Press the claw and move the lever in the direction of the arrow in the illustration.*1

(2) Disconnect the fuel pump ECU connector.*2

(b) Remove the nut and fuel pump ECU.

NOTICE:

Make sure the fuel pump ECU is not subjected to physical shocks, such as being dropped, etc.

    Fuel Pressure Regulator

    Fuel Pump

    See More:

    Toyota Tundra Service Manual > Roof Drip Side Finish Moulding: Installation
    INSTALLATION CAUTION / NOTICE / HINT HINT: Use the same procedures for the RH side and LH side. The procedures listed below are for the LH side. When installing a clip, heat the vehicle body and clip using a heat light. When installing the moulding, heat the vehicle body and moulding using a heat li ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2025 Copyright www.ttundra.com
    0.0138