Toyota Tundra Service Manual: Reassembly

Toyota Tundra Service Manual / Engine, Hybrid System / 1ur-fe Lubrication / Oil Pump / Reassembly

REASSEMBLY

PROCEDURE

1. INSTALL OIL PUMP RELIEF VALVE

(a) Coat the oil pump relief valve with engine oil.

(b) Install the relief valve and relief valve spring into the oil pump cover hole.

Torque:

53 N·m {540 kgf·cm, 39 ft·lbf}

2. INSTALL OIL PUMP COVER

(a) Install the driven rotor, drive rotor and oil pump cover with the 13 bolts.

Torque:

10 N·m {105 kgf·cm, 8 ft·lbf}

See More:

Toyota Tundra Service Manual > Parking Brake Assembly: Reassembly
REASSEMBLY CAUTION / NOTICE / HINT HINT: Use the same procedures for the LH side and RH side. The procedures listed below are for the LH side. PROCEDURE 1. INSTALL PARKING BRAKE ANCHOR BLOCK (a) Install the anchor block with the 2 nuts. Torque: 86 N·m {877 kgf·cm, 63 ft·lbf} 2. CONNECT NO. 3 PARK ...

Toyota Tundra Service Manual: Reassembly

Installation

Removal

See More:

Toyota Tundra Owners Manual

Toyota Tundra Service Manual