Toyota Tundra Service Manual: Propeller Shaft System

Problem Symptoms Table

PROBLEM SYMPTOMS TABLE

HINT:

Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.

Propeller Shaft (for 2WD)

Symptom

Suspected Area

See page

Noise

Center support bearing (worn)

Sleeve yoke spline (worn)

-

Spider bearing (worn or stuck)

Vibration

Sleeve yoke spline (stuck)

-

Propeller shaft (runout)

Propeller shaft (imbalance)

Propeller Shaft (for 4WD)

Symptom

Suspected Area

See page

Noise

Center support bearing (worn)

Sleeve yoke spline (worn)

-

Spider bearing (worn or stuck)

Sleeve yoke spline (stuck)

-

Vibration

Propeller shaft (runout)

Propeller shaft (imbalance)

Front Propeller Shaft

Symptom

Suspected Area

See page

Noise

Spider bearing (worn or stuck)

Vibration

Propeller shaft (runout)

Propeller shaft (imbalance)

    Removal

    Suspension

    See More:

    Toyota Tundra Service Manual > Blind Spot Monitor System: Software Incompatibility with Body Control Module "B" (U1331)
    DESCRIPTION This DTC is stored when the destination information of the main body ECU (multiplex network body ECU) does not match that of the blind spot monitor sensors. DTC Code DTC Detection Condition Trouble Area U1331 Destination information of the main body ECU (multiplex network body ECU) and b ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2023 Copyright www.ttundra.com
    0.0097