Toyota Tundra Service Manual: Installation

Toyota Tundra Service Manual / Vehicle Interior / Door Lock / Door Control Switch(for Front Lh) / Installation

INSTALLATION

PROCEDURE

1. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (DOOR CONTROL SWITCH ASSEMBLY)

(a) Install the power window regulator master switch assembly (door control switch assembly) with the 3 screws.

Text in Illustration

*A

for Regular Cab

*B

for Double Cab, for CrewMax

2. INSTALL FRONT ARMREST UPPER BASE PANEL LH

(a) Connect the connector.

Text in Illustration

*A

for Regular Cab

*B

for Double Cab, for CrewMax

(b) Attach the 2 clips and 5 claws to install the front armrest upper base panel LH.

Text in Illustration

*A

for Regular Cab

*B

for Double Cab, for CrewMax
    Inspection

    Removal

    See More:

    Toyota Tundra Service Manual > Sfi System: Insufficient Coolant Temperature for Closed Loop Fuel Control (P0125)
    DESCRIPTION Refer to DTC P0115 (See page ). DTC No. DTC Detection Condition Trouble Area P0125 Engine Coolant Temperature (ECT) does not reach closed-loop enabling temperature for 20 minutes (this period varies with engine start ECT) (2 trip detection logic) ECT sensor Cooling system Water inlet wit ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2026 Copyright www.ttundra.com
    0.0127