Toyota Tundra Service Manual: Fender Liner(for Rear Side)

Toyota Tundra Service Manual / Vehicle Interior / Exterior / Fender Liner(for Rear Side)

Components

COMPONENTS

ILLUSTRATION

Installation

INSTALLATION

CAUTION / NOTICE / HINT

HINT:

  • Use the same procedure for the RH and LH sides.
  • The procedures listed below are for the LH side.

PROCEDURE

1. INSTALL REAR WHEEL HOUSE LINER LH

(a) Install the rear wheel house liner LH with 22 new grommets.

(b) Install the 5 screws.

2. INSTALL QUARTER PANEL REAR MUDGUARD LH

Removal

REMOVAL

CAUTION / NOTICE / HINT

HINT:

  • Use the same procedure for the RH and LH sides.
  • The procedures listed below are for the LH side.

PROCEDURE

1. REMOVE QUARTER PANEL REAR MUDGUARD LH (w/ Mudguard)

2. REMOVE REAR WHEEL HOUSE LINER LH

(a) Remove the 5 screws.

(b) Remove the 22 grommets and rear wheel house liner LH.

    Fender Liner(for Front Side)

    Fender Panel Mudguard

    See More:

    Toyota Tundra Service Manual > Cylinder Head: Replacement
    REPLACEMENT PROCEDURE 1. REPLACE INTAKE VALVE GUIDE BUSH (a) Heat the cylinder head to approximately 80 to 100°C (176 to 212°F). (b) Place the cylinder head on wooden blocks. (c) Using SST and a hammer, tap out the valve guide bush. SST: 09201-10000 09201-01050 SST: 09950-70010 09951-07100 (d) Usi ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2026 Copyright www.ttundra.com
    0.0101