DISASSEMBLY CAUTION / NOTICE / HINT HINT:
PROCEDURE 1. REMOVE FRONT TURN SIGNAL LIGHT BULB ![]() (a) Turn the front turn signal light bulb socket in the direction indicated by the arrow to remove it.
2. REMOVE FRONT SIDE MARKER LIGHT BULB ![]() (a) Turn the front side marker light bulb socket in the direction indicated by the arrow to remove it.
|
Toyota Tundra Service Manual > Blind Spot Monitor System: Short to GND in Outer Mirror Indicator(Master) (C1AB2)
DESCRIPTION This DTC is stored when the blind spot monitor sensor RH detects a short to ground in the outer rear view mirror indicator RH. DTC No. DTC Detection Condition Trouble Area C1AB2 Both of the following conditions are met: The blind spot monitor system is on The current that is sent from th ...