INSPECTION PROCEDURE 1. INSPECT INNER REAR VIEW MIRROR ASSEMBLY (w/ EC Mirror) (a) Inspect the operation of the electrochromic inner rear view mirror assembly. 
(1) Connect a positive (+) lead from the battery to terminal 10(+B) and a negative (-) lead to terminal 3(E). (2) Press the EC switch. (3) Attach black colored tape to the forward sensor to prevent it from sensing. (4) Light up the mirror with an electric light, and check that the mirror surface changes from bright to dark. OK: Mirror surface changes from bright to dark. |
Toyota Tundra Service Manual > Front Shock Absorber: Installation
INSTALLATION CAUTION / NOTICE / HINT HINT: Use the same procedures for the RH side and LH side. The procedures listed below are for the LH side. A bolt without a torque specification is shown in the standard bolt chart (see page ). PROCEDURE 1. TEMPORARILY INSTALL FRONT SHOCK ABSORBER WITH COIL SPRI ...
