Toyota Tundra Service Manual: Installation

INSTALLATION

PROCEDURE

1. INSTALL INNER REAR VIEW MIRROR ASSEMBLY (w/ EC Mirror)

(a) Using a T20 "TORX" socket wrench, install the inner rear view mirror with the "TORX" screw.

Torque:

1.2 N·m {12 kgf·cm, 11 in·lbf}

"TORX" screw

Connector

(b) Connect the connector.

2. INSTALL INNER REAR VIEW MIRROR STAY HOLDER COVER (w/ EC Mirror)

(a) Attach the 2 claws.

(b) Attach the 2 claws to install the inner rear view mirror stay holder cover as shown in the illustration.

3. INSTALL INNER REAR VIEW MIRROR ASSEMBLY (w/o EC Mirror)

(a) Using a T20 "TORX" socket wrench, install the inner rear view mirror with the screw.

Torque:

1.2 N·m {12 kgf·cm, 11 in·lbf}

    Inspection

    Removal

    See More:

    Toyota Tundra Service Manual > Automatic Transmission System: Initialization
    INITIALIZATION 1. RESET MEMORY NOTICE: Perform Reset Memory (AT initialization) when replacing the automatic transmission assembly, valve body assembly or any of the shift solenoid valves. Reset Memory can be performed only with the Techstream. HINT: The ECM memorizes the control conditions of the a ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2023 Copyright www.ttundra.com
    0.0308