REMOVAL PROCEDURE 1. REMOVE INNER REAR VIEW MIRROR STAY HOLDER COVER (w/ EC Mirror)
(b) Detach the 2 claws and remove the inner rear view mirror stay holder cover. 2. REMOVE INNER REAR VIEW MIRROR ASSEMBLY (w/ EC Mirror) 
(a) Disconnect the connector. (b) Using a T20 "TORX" socket wrench, remove the "TORX" screw and inner rear view mirror. 3. REMOVE INNER REAR VIEW MIRROR ASSEMBLY (w/o EC Mirror) 
(a) Using a T20 "TORX" socket wrench, remove the "TORX" screw and inner rear view mirror. |
Toyota Tundra Service Manual > Propeller Shaft Assembly(for 4wd): Inspection
INSPECTION CAUTION / NOTICE / HINT PROCEDURE 1. INSPECT PROPELLER SHAFT WITH CENTER BEARING ASSEMBLY (a) Using a dial indicator, measure the intermediate shaft runout. Maximum runout: 0.61 mm (0.0240 in.) If the intermediate shaft runout is more than the maximum, replace the propeller shaft with cen ...
