Toyota Tundra Service Manual: Other System Malfunction (C1A63)

DESCRIPTION

The millimeter wave radar sensor assembly receives accelerator pedal position sensor signals from the ECM to determine if the accelerator pedal is being depressed. If the ECM detects a malfunction in the accelerator pedal position sensor or SFI system, the millimeter wave radar sensor assembly is notified via CAN communication and stores DTC C1A63.

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

C1A63

Other System Malfunction

With the ignition switch ON, the millimeter wave radar sensor assembly receives an accelerator pedal position sensor malfunction signal from the ECM for approximately 2 seconds or more.

SFI system

PROCEDURE

1.

GO TO SFI SYSTEM

HINT:

If DTC C1A63 is output by the pre-collision system, perform troubleshooting for the SFI system.

  • for 1UR-FE: Click here
  • for 3UR-FE: Click here
  • for 3UR-FBE: Click here
NEXT

END

    Brake System Malfunction (C1A50)

    Brake Control Signal Mismatch (C1A69)

    See More:

    Toyota Tundra Service Manual > Tire And Wheel System: Inspection
    INSPECTION PROCEDURE 1. INSPECT TIRE (a) Check the tires for wear and proper inflation pressure. Standard cold tire inflation pressure: Tire size Front kPa (kgf/cm2, psi) Rear kPa (kgf/cm2, psi) P255/70R18 210 (2.1, 30) 230 (2.3, 33) P275/65R18 P275/55R20 P255/70R18 (Spare Tire) P275/65R18 (Spare Ti ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2026 Copyright www.ttundra.com
    0.0155