Toyota Tundra Service Manual: Heater Circuit (C1AAE)

Toyota Tundra Service Manual / Vehicle Interior / Pre-collision / Pre-collision System / Heater Circuit (C1AAE)

DESCRIPTION

If the forward recognition camera detects a malfunction in the camera heater (forward recognition hood) circuit, it will output a malfunction signal to the millimeter wave radar sensor assembly via CAN communication and DTC C1AAE will be stored.

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

C1AAE

Heater Circuit

When the ignition switch is ON, the millimeter wave radar sensor assembly receives a camera heater (forward recognition hood) circuit malfunction signal from the forward recognition camera continuously for 5 seconds or more.

Forward recognition camera system

PROCEDURE

1.

GO TO FORWARD RECOGNITION CAMERA SYSTEM

HINT:

If DTC C1AAE is output by the pre-collision system, perform troubleshooting for the forward recognition camera system.

Click here

NEXT

END
    Front Camera Module Beam Axis Not Adjusted (C1AA9)

    Customize Parameters

    See More:

    Toyota Tundra Service Manual > Side Moulding: Installation
    INSTALLATION CAUTION / NOTICE / HINT HINT: Use the same procedure for the RH and LH sides. The procedures listed below are for the LH side. PROCEDURE 1. INSTALL REAR BODY NO. 3 PROTECTOR LH HINT: When installing the rear body No. 3 protector LH, heat the vehicle body and rear body No. 3 protector LH ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2026 Copyright www.ttundra.com
    0.0098