Toyota Tundra Service Manual: Customize Parameters

CUSTOMIZE PARAMETERS

NOTICE:

  • When the customer requests a change in a function, first make sure that the function can be customized.
  • Make a note of the current settings before customizing.

HINT:

The following PCS functions and the pre-collision system sensitivity setting can be changed from their default setting.

CUSTOMIZE PRE-COLLISION SYSTEM

(a) Customizing with the Techstream

(1) Turn the ignition switch off.

(2) Connect the Techstream to the DLC3.

(3) Turn the ignition switch to ON.

(4) Turn the Techstream on.

(5) Enter the following menus: Customize Setting / Others.

(6) Select the setting by referring to the table below.

Others

Tester Display

Description

Default

Setting

ECU

PCS Operation State Retention Setting

Refer to the table below

OFF

0:OFF,1:ON

Millimeter wave radar sensor assembly

PCS Alarm Activation Distance Retention Setting 1

Refer to the table below

OFF

0:OFF,1:ON

Millimeter wave radar sensor assembly

PCS Alarm Activation Distance Retention Setting 2

Refer to the table below

ON

0:OFF,1:ON

Millimeter wave radar sensor assembly

PCS Alarm Activation Distance Retention Setting 3

Refer to the table below

OFF

0:OFF,1:ON

Millimeter wave radar sensor assembly

Customize Setting

Description

Setting

PCS Operation State Retention Setting

Function to maintain the pre-collision system on/off setting when the ignition switch is turned off and then to ON.

OFF: Not maintained (Pre-collision system always turns on)

ON: Maintained

PCS Alarm Activation Distance Retention Setting 1

Function to maintain the sensitivity setting of the pre-collision system when the pre-collision system is turned off and then on.

OFF: Not maintained (Setting changes to "Mid")

ON: Maintained

PCS Alarm Activation Distance Retention Setting 2

Function to maintain the sensitivity setting of the pre-collision system when the ignition switch is turned off while the pre-collision system is on.

OFF: Not maintained (Setting changes to "Mid")

ON: Maintained

PCS Alarm Activation Distance Retention Setting 3

Function to maintain the sensitivity setting of the pre-collision system when the ignition switch is turned off while the pre-collision system is off.

OFF: Not maintained (Setting changes to "Mid")

ON: Maintained

    Heater Circuit (C1AAE)

    Data List / Active Test

    See More:

    Toyota Tundra Service Manual > Dynamic Radar Cruise Control System: Diagnostic Trouble Code Chart
    DIAGNOSTIC TROUBLE CODE CHART Dynamic Radar Cruise Control System DTC No. Detection Item Link C1A02 Vehicle Information Not Obtained C1A10 Front Radar Sensor C1A11 Front Radar Sensor Incorrect Axial Gap C1A14 Front Radar Sensor Beam Axis Not Adjusted C1A4A Skid Control Buzzer Circuit C1A52 Radar Cru ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2024 Copyright www.ttundra.com
    0.0319