Toyota Tundra Service Manual: Child Restraint Seat Anchor Bracket(for Crewmax Rh Side)

Toyota Tundra Service Manual / Vehicle Interior / Seat Belt / Child Restraint Seat Anchor Bracket(for Crewmax Rh Side)

Components

COMPONENTS

ILLUSTRATION

Installation

INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

PROCEDURE

1. INSTALL TETHER ANCHOR BRACKET SUB-ASSEMBLY

(a) Install the tether anchor bracket sub-assembly with the bolt.

Torque:

33 N·m {337 kgf·cm, 24 ft·lbf}

2. INSTALL REAR SEAT HEADREST ASSEMBLY

3. INSTALL REAR SEAT ASSEMBLY RH

Removal

REMOVAL

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

PROCEDURE

1. REMOVE REAR SEAT ASSEMBLY RH

2. REMOVE REAR SEAT HEADREST ASSEMBLY

3. REMOVE TETHER ANCHOR BRACKET SUB-ASSEMBLY

(a) Remove the bolt and tether anchor bracket sub-assembly.

    Child Restraint Seat Anchor Bracket(for Crewmax Lh Side)

    Child Restraint Seat Anchor Bracket(for Double Cab)

    See More:

    Toyota Tundra Service Manual > Touch Select 2-4 And High-low System: Automatic Disconnecting Differential Motor Control Circuit High (P17A2)
    DESCRIPTION This DTC is detected when a short to B+ is detected in the A.D.D. shift motor drive circuit. DTC Code DTC Detection Condition Diagnosis Condition Malfunction Status Malfunction Time Other Trouble Area P17A2 Ignition switch ON (when not switching between 2WD and 4H) Short to B+ in the A.D ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2025 Copyright www.ttundra.com
    0.0114