Toyota Tundra Service Manual: Removal

REMOVAL

CAUTION / NOTICE / HINT

HINT:

  • Use the same procedures for the LH side and RH side.
  • The procedures listed below are for the LH side.

PROCEDURE

1. REMOVE REAR SEAT ASSEMBLY

(a) Remove the rear seat (see page ).

2. REMOVE REAR DOOR SCUFF PLATE

3. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP

4. REMOVE LOWER QUARTER TRIM PANEL ASSEMBLY

(a) Detach the 2 claws and remove the cover.

(b) Remove the bolt and seat belt anchor.

(c) Detach the 6 clips and remove the quarter trim panel.

5. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY

6. REMOVE REAR SEAT OUTER BELT ASSEMBLY

(a) Remove the bolt and shoulder anchor.

(b) Remove the bolt and disconnect the seat belt's shoulder anchor.

(c) Remove the 2 bolts and seat belt.

    Installation

    Seat Belt Warning System

    See More:

    Toyota Tundra Service Manual > Dynamic Radar Cruise Control System: Cruise Control Input Circuit (P0575)
    DESCRIPTION This DTC is stored when there is a malfunction in the ECM. DTC No. Detection Item DTC Detection Condition Trouble Area P0575 Cruise Control Input Circuit Either of the following conditions is met: When the ignition switch is ON, STP signals received by the ECM supervisory CPU and that re ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2025 Copyright www.ttundra.com
    0.033