Toyota Tundra Service Manual: On-vehicle Inspection

ON-VEHICLE INSPECTION

PROCEDURE

1. CHECK SEAT POSITION AIRBAG SENSOR (VEHICLE NOT INVOLVED IN COLLISION)

(a) Perform a diagnostic system check (see page ).

2. CHECK SEAT POSITION AIRBAG SENSOR (VEHICLE INVOLVED IN COLLISION)

(a) Perform a diagnostic system check (see page ).

(b) Even if the airbag was not deployed, check if there is any damage to the seat position airbag sensor. If there are any defects as mentioned below, replace the seat position airbag sensor with a new one:

  • Cracks, dents or chips on the sensor housing.
  • Cracks or other damage to the connector.

CAUTION:

For removal and installation procedures of the seat position airbag sensor, be sure to follow the correct procedure.

    Installation

    Removal

    See More:

    Toyota Tundra Service Manual > Automatic Transmission System: Problem Symptoms Table
    PROBLEM SYMPTOMS TABLE HINT: Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2023 Copyright www.ttundra.com
    0.0185