Toyota Tundra Service Manual: Driver Side Power Window Auto Down Function does not Operate

Toyota Tundra Service Manual / Vehicle Interior / Window / Glass / Power Window Control System(w/o Jam Protection Function) / Driver Side Power Window Auto Down Function does not Operate

DESCRIPTION

  • If the AUTO DOWN function does not operate, the cause may be one or more of the following:
  • The master switch has a malfunction.
  • The driver side motor has a malfunction.
  • The wiring between the master switch and the driver side motor is open or shorted.

WIRING DIAGRAM

PROCEDURE

1.

CHECK MANUAL UP / DOWN FUNCTION

(a) Check that the manual UP/DOWN function of the master switch can operate the driver door power window.

OK:

Manual UP/DOWN function operates normally.

OK

REPLACE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY

NG

OTHER PROBLEM

    Data List / Active Test

    Driver Side Power Window does not Operate with Power Window Master Switch

    See More:

    Toyota Tundra Service Manual > Rear Bumper (for Steel Type Bumper): Disassembly
    DISASSEMBLY PROCEDURE 1. REMOVE REAR BUMPER PLATE LH (a) Detach the 3 claws and clip and remove the rear bumper plate LH. 2. REMOVE REAR BUMPER PLATE RH HINT: Use the same procedure described for the LH side. 3. REMOVE REAR BUMPER PAD SUB-ASSEMBLY LH (a) Remove the 3 clips. (b) Detach the 12 claws a ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2025 Copyright www.ttundra.com
    0.0155