Toyota Tundra Service Manual: Traffic Information is not Displayed

CAUTION / NOTICE / HINT

NOTICE:

  • Traffic information requires payment. An "XM Nav Traffic" contract must be made between the satellite radio company and the user. If the contract expires, traffic information will not be available.
  • Traffic information does not apply to all roads, only main roads. For the latest information on coverage areas, contact the satellite radio company.

PROCEDURE

1.

CHECK DISPLAY

(a) Check which communication is not being used for displaying traffic information.

HINT:

Display of traffic information received via HD traffic is given priority while in an HD radio service area.

Result

Result

Proceed to

Traffic information using HD radio communication is not displayed

A

Traffic information using Entune function communication is not displayed

B

B

GO TO STEP 3

A

2.

CHECK SYMPTOMS

(a) Check for symptoms (poor sound quality, sounds cannot be heard, etc.) during conventional FM radio broadcasting.

Result

Result

Proceed to

Symptoms occur

A

Symptoms do not occur

B

A

GO TO "RADIO BROADCAST CANNOT BE RECEIVED OR POOR RECEPTION" IN PROBLEM SYMPTOMS TABLE

B

GO TO STEP 5

3.

CHECK SYMPTOMS

(a) Check for symptoms (cellular phone cannot be registered, applications cannot be started, etc.) with an ordinary Entune function.

Result

Result

Proceed to

Symptoms occur

A

Symptoms do not occur

B

A

GO TO "ENTUNE FUNCTION" IN PROBLEM SYMPTOMS TABLE

B

4.

CHECK SETTINGS

(a) Check if the navigation system is set to receive traffic information using Entune function communication as well as HD radio communication.

OK:

The navigation system is set to use Entune function communication.

NG

END

OK

5.

CHECK SETTINGS OF TRAFFIC INFORMATION

(a) Check if the display setting of traffic information on the navigation screen is on.

OK:

The display setting of traffic information is on.

NG

END

OK

6.

CHECK COVERAGE AREA

(a) Check that the current position of the vehicle is within the HD traffic or Entune function coverage area.

OK:

Vehicle is within coverage area.

NG

MOVE TO WITHIN COVERAGE AREA (FOR LATEST COVERAGE AREA, CONFIRM WITH RADIO STATION)

OK

7.

CHECK SCALE OF MAP DISPLAY

(a) Check if the traffic information that is currently not displayed can be displayed at the scale shown in the table below.

Traffic Information to be Displayed

Display Scale

Traffic information list

1:1280000 or below

Traffic information icon (Closed Road, Accidents, Danger, Road Conditions, Road Works, Weather)

1:640000 or below

Traffic information icon (Stationary Traffic Jam, Delays, Parking, Other)

1:80000 or below

OK:

Traffic information can be displayed.

Result

Result

Proceed to

OK

A

NG (for Column Shift Type)

B

NG (for Floor Shift Type)

C

A

END

B

REPLACE NAVIGATION RECEIVER ASSEMBLY

C

REPLACE NAVIGATION RECEIVER ASSEMBLY

    Touch Panel Switch does not Function

    Sending Malfunction (Navigation to APGS) (U0073,U0100,U0129,U0140,U0155,U0164)

    See More:

    Toyota Tundra Service Manual > Sfi System: Open in Secondary Air Injection System Heater Control Circuit (P144C,P144D)
    DESCRIPTION The ECM operates the air pump heater (AI HTR) relay which causes the air pump heater (AI HTR) to operate. DTC No. DTC Detection Condition Trouble Area P144C Open or short in the air pump heater (AI HTR) relay circuit for 5 seconds (1 trip detection logic). Open or short in air pump heate ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2024 Copyright www.ttundra.com
    0.0106