The following screen is displayed when speaking on the phone.
To adjust the call volume Select "-" or "+". You can also adjust the volume using the volume knob. To prevent the other party from hearing your voice Select "Mute". Inputting tones When using phone services such as an answering service or a bank, you can store phone numbers and code numbers in the contact. 1. Select "0-9". 2. Input the number. ■ Release Tones "Release Tones" appear when a continuous tone signal(s) containing a "w" is registered in the contact list. 1. Select "Release Tones". ■Release Tones
To transfer a call Select "Handset Mode" to change from a hands-free call to a cellular phone call. Select "Handset Mode" to off from a cellular phone call to a hands-free call. Transmit volume setting 1. Select "Transmit Volume". 2. Select the desired level for the transmit volume. 3. Select "OK". To hang up Press the switch on the steering wheel or select . Call waiting When a call is interrupted by a third party while talking, an incoming call message will be displayed. To talk with the other party: Press the switch on the steering wheel or select . To refuse the call: Press the switch on the steering wheel or select . Every time you press the switch on the steering wheel or select during call waiting, you will be switched to the other party. ■Transferring calls
■Call waiting operation Call waiting operation may differ depending on your phone company and cellular phone. |
Toyota Tundra Service Manual > Sfi System: Brake Switch "A" / "B" Correlation (P0504)
DESCRIPTION The stop light switch is a duplex system that transmits two signals: STP and ST1-. These two signals are used by the ECM to monitor whether or not the brake system is working properly. If the signals, which indicate the brake pedal is being depressed and released, are detected simultaneo ...