Toyota Tundra Service Manual: Installation

INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

HINT:

  • Use the same procedure for the RH and LH sides.
  • The procedure listed below is for the LH side.

PROCEDURE

1. INSTALL SEATBACK CLIMATE CONTROL BLOWER LH (w/ Climate Control Seat System)

2. INSTALL FRONT SEATBACK HOOK

(a) Install the 2 front seatback hooks to the lumbar support adjuster assembly LH.

3. INSTALL LUMBAR SUPPORT ADJUSTER ASSEMBLY LH

(a) Attach the 2 guides and 2 clips to install the lumbar support adjuster assembly LH.

4. INSTALL FRONT SEATBACK WIRE LH (for Driver Side)

5. INSTALL FRONT SEATBACK WIRE RH (for Front Passenger Side)

6. INSTALL SEPARATE TYPE FRONT SEATBACK PAD

7. INSTALL SEPARATE TYPE FRONT SEATBACK COVER

8. INSTALL SEPARATE TYPE FRONT SEATBACK ASSEMBLY

9. INSTALL FRONT INNER NO. 1 SEAT CUSHION SHIELD LH

10. INSTALL FRONT SEAT CUSHION SHIELD LH

11. INSTALL FRONT SEAT ASSEMBLY LH

(See page )

    Inspection

    Removal

    See More:

    Toyota Tundra Service Manual > Oil Pump: Reassembly
    REASSEMBLY PROCEDURE 1. INSTALL OIL PUMP RELIEF VALVE (a) Coat the oil pump relief valve with engine oil. (b) Install the relief valve and relief valve spring into the oil pump cover hole. (c) Install the plug. Torque: 53 N·m {540 kgf·cm, 39 ft·lbf} 2. INSTALL OIL PUMP COVER (a) Install the drive ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2024 Copyright www.ttundra.com
    0.0235