Toyota Tundra Service Manual: Reassembly

REASSEMBLY

PROCEDURE

1. INSTALL MASTER CYLINDER RESERVOIR GROMMET

(a) Apply a light coat of lithium soap base glycol grease to 2 new grommets and install them onto the master cylinder body.

2. INSTALL BRAKE MASTER CYLINDER RESERVOIR SUB-ASSEMBLY

(a) Install the master cylinder reservoir onto the master cylinder body.

(b) Using a T25 "TORX" socket wrench, install the screw.

Torque:

5.5 N·m {56 kgf·cm, 49 in·lbf}

    Installation

    Removal

    See More:

    Toyota Tundra Service Manual > Pre-collision System: Vehicle Information Not Obtained (C1A02)
    DESCRIPTION When a new millimeter wave radar sensor assembly is installed, it receives vehicle specification information from the main body ECU (multiplex network body ECU) and stores the information. DTC C1A02 is stored when the millimeter wave radar sensor assembly receives the vehicle specificati ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2025 Copyright www.ttundra.com
    0.0135